1. Take out the diverter valve and the adapter that come with C-630
Counter Top Microclustered Functional Water Generator.
2. Screw to release the top nut and bottom nut from the diverter valve
and insert one hose through one of the nuts.
3. Connect the hose to the diverter valve and screw the nut back to the
diverter valve.
4. Repeat step 2 and 3 to connect the other hose to the diverter valve
through the other nut.
5. Pull out to remove the protection plug from the generator.
6. Use your nail to pull out the small blue clip.
7. Take the hose which connects to the Bottom nut of the diverter valve,
and insert the other end of hose firmly into the Output of the
generator until the hose cannot be inserted further.
8. Push the small blue clip back to the Output of the generator.
9. Take the hose which connects to the Top nut of the diverter valve,
and insert the other end of the hose into the Input of the generator
until the hose cannot be inserted further. Then Push the small blue
clip back to the Input of the generator.
10. Original tap faucet.
11. Screw to release the head from the original tap faucet.
12. Screw to connect the diverter valve to the tap faucet. You may need
to use the adapter to connect the diverter valve to the faucet
if the screw of your faucet is a female instead of a male.
13. Now you can use the small handle on the diverter valve to switch
between tap water and microclustered functional water.
14. For the first time use, leave the microclustered functional
water running for 20 minutes to rinse off the protective carbon materials
from the generator before drinking.
